Nfpa 110: Standard for Emergency and Standby Power Systems, 2010 Edition

Give facilities reliable auxiliary power on demand with the updated 2010 NFPA 110. If disruption of the normal utility supply occurs, readiness of emergency power is a key consideration in safeguarding building occupants. NFPA 110: Standard for Emergency and Standby Power Systems covers performance requirements for power systems providing an alternate source of electrical power in the event that the primary power source fails. Power systems covered include power sources, transfer equipment, controls, supervisory equipment, and all related electrical and mechanical auxiliary and accessory equipment needed to supply electrical power to the load terminals of the transfer equipment. Among the changes in the 2010 edition of NFPA 110 are:
• Clarification that the Standard is intended to apply to Level 1 or Level 2 emergency power supply systems (EPSSs)
• Operation testing and routine maintenance provisions cover new and existing EPSSs.
• Revised definitions of automatic transfer switch and non-automatic transfer switch for consistency with NFPA 111 and correlation with relevant product standards
• Revised material on Level 1 and Level 2 EPSSs clarifies the function and applicability of each type of system
• Differentiation of requirements for acceptance testing for new and unoccupied buildings versus those for existing occupied buildings and facilities. In addition, criteria for test duration, step-testing intervals, and required documentation have been modified.
• Revised rules for operational test durations for diesel and spark-ignited prime movers. Also, the 36 month test requirement has been revised to clarify the maximum duration, the minimum acceptable EPS loading or operating condition, and the method of test initiation.

1300427539
Nfpa 110: Standard for Emergency and Standby Power Systems, 2010 Edition

Give facilities reliable auxiliary power on demand with the updated 2010 NFPA 110. If disruption of the normal utility supply occurs, readiness of emergency power is a key consideration in safeguarding building occupants. NFPA 110: Standard for Emergency and Standby Power Systems covers performance requirements for power systems providing an alternate source of electrical power in the event that the primary power source fails. Power systems covered include power sources, transfer equipment, controls, supervisory equipment, and all related electrical and mechanical auxiliary and accessory equipment needed to supply electrical power to the load terminals of the transfer equipment. Among the changes in the 2010 edition of NFPA 110 are:
• Clarification that the Standard is intended to apply to Level 1 or Level 2 emergency power supply systems (EPSSs)
• Operation testing and routine maintenance provisions cover new and existing EPSSs.
• Revised definitions of automatic transfer switch and non-automatic transfer switch for consistency with NFPA 111 and correlation with relevant product standards
• Revised material on Level 1 and Level 2 EPSSs clarifies the function and applicability of each type of system
• Differentiation of requirements for acceptance testing for new and unoccupied buildings versus those for existing occupied buildings and facilities. In addition, criteria for test duration, step-testing intervals, and required documentation have been modified.
• Revised rules for operational test durations for diesel and spark-ignited prime movers. Also, the 36 month test requirement has been revised to clarify the maximum duration, the minimum acceptable EPS loading or operating condition, and the method of test initiation.

46.5 Out Of Stock
Nfpa 110: Standard for Emergency and Standby Power Systems, 2010 Edition

Nfpa 110: Standard for Emergency and Standby Power Systems, 2010 Edition

by NFPA (National Fire Prevention Association)
Nfpa 110: Standard for Emergency and Standby Power Systems, 2010 Edition

Nfpa 110: Standard for Emergency and Standby Power Systems, 2010 Edition

by NFPA (National Fire Prevention Association)

Paperback

$46.50 
  • SHIP THIS ITEM
    Temporarily Out of Stock Online
  • PICK UP IN STORE

    Your local store may have stock of this item.

Related collections and offers


Overview

Give facilities reliable auxiliary power on demand with the updated 2010 NFPA 110. If disruption of the normal utility supply occurs, readiness of emergency power is a key consideration in safeguarding building occupants. NFPA 110: Standard for Emergency and Standby Power Systems covers performance requirements for power systems providing an alternate source of electrical power in the event that the primary power source fails. Power systems covered include power sources, transfer equipment, controls, supervisory equipment, and all related electrical and mechanical auxiliary and accessory equipment needed to supply electrical power to the load terminals of the transfer equipment. Among the changes in the 2010 edition of NFPA 110 are:
• Clarification that the Standard is intended to apply to Level 1 or Level 2 emergency power supply systems (EPSSs)
• Operation testing and routine maintenance provisions cover new and existing EPSSs.
• Revised definitions of automatic transfer switch and non-automatic transfer switch for consistency with NFPA 111 and correlation with relevant product standards
• Revised material on Level 1 and Level 2 EPSSs clarifies the function and applicability of each type of system
• Differentiation of requirements for acceptance testing for new and unoccupied buildings versus those for existing occupied buildings and facilities. In addition, criteria for test duration, step-testing intervals, and required documentation have been modified.
• Revised rules for operational test durations for diesel and spark-ignited prime movers. Also, the 36 month test requirement has been revised to clarify the maximum duration, the minimum acceptable EPS loading or operating condition, and the method of test initiation.


Product Details

ISBN-13: 9780064641104
Publisher: National Fire Protection Association (NFPA)
Publication date: 01/01/1900
Pages: 37
Product dimensions: 8.10(w) x 10.80(h) x 0.30(d)

About the Author

Deborah M. Plummer has over 20 yearsâ?? experience of facilitating groups and working individually with both children and adults. Formerly a clinical lead therapist working within the NHS, she also has extensive experience as a senior lecturer in aspects of health psychology and counselling. She regularly runs workshops and short courses on the uses of imagery, games and story-telling in the promotion of well-being. Deborahâ??s website can be found at www.deborahplummer.co.uk.

Deborah M. Plummer has over 20 years' experience of facilitating groups and working individually with both children and adults. Formerly a clinical lead therapist working within the NHS, she also has extensive experience as a senior lecturer in aspects of health psychology and counselling. She runs workshops and short courses on the uses of imagery, games and story-telling in the promotion of well-being. Deborah is author of several titles, including Helping Children to Improve their Communication Skills, Helping Children to Cope with Change, Stress and Anxiety and Helping Children to Build Self-Esteem, 2nd edition, all published by Jessica Kingsley Publishers. Deborah's website can be found at www.deborahplummer.co.uk.

Table of Contents

Acknowledgements. Introduction. Part I - Theoretical and Practical Background. 1. Self-esteem and Wellbeing 2. Self-esteem, Learning and the Process of Change. 3. Working with Imagery and Imagination. 4. Learning and Generalising Knowledge and Skills 5. Working with Groups. Part II - Activities and Guidelines Introduction. 1. Getting Started. 2. What is Self-esteem? 3. Who am I? 4.Self-awareness. 5. The Challenge of Change. 6. Self-acceptance. 7. Self and Others. 8. Self-reliance and Managing Stress. 9. Self-expression. 10. Creative Problem-solving. 11. Setting and Achieving Goals. 12.Keeping it All Going, References. Appendix A. Appendix B. Appendix C.
From the B&N Reads Blog

Customer Reviews